I am proficient in photoshop as well, albeit nonprofessional. That being said, GIMP on its own is realllly hard to use after coming from PS. But with photogimp it’s a ton easier. I wouldn’t say it’s quite as good, but it’s pretty close. I’d give that a shot, at the very least.

Great idea - thank you!

Terrific, I may have to give them a shout. Thanks much!

I’ve used Termius on my iPhone, it works pretty well. Unsure if they’ve got an iPad client but I would be surprised if they didn’t?

I’d agree, but the fact that it’s specifically written that you’re now allowed to call homosexuality a mental illness, for example, seems to me a little more than just “I don’t want to moderate any more”

I can never seem to get PETG to print nicely. Occasionally it’ll do a decent job on my Bambu P1S but usually not, and don’t even think about trying to use it on any of my other printers… I’ve even had better luck printing with PC!

Not so much go bad but kinda like others have mentioned, moisture in the air will always eventually get soaked into it. It’s worse with other filaments - Nylon, PETG, and ABS are particularly bad for it - but PLA definitely shares the same issues. Moisture from the air also doesn’t just suddenly leave - you need to manually and purposefully dry the filament out with a filament dryer or food dryer. Moist PLA can print just fine, but the moisture can also cause the filament to be super brittle, and/or cause little bubbles or breaks in the filament after it comes out of the nozzle.

Not sure why it would appear to have happened suddenly after a number of years, but I have a suspicion that it probably didn’t happen quite as suddenly as you think it did. Could also be the shape of the roll itself - maybe it’s got little “windows” towards the center of the roll that allowed in more moisture than the closed-off portions and you only just now used the roll up to that point?

I’ve got a bambu and I’ve also got an ender 3v3. The 3v3 in my opinion is more or less a slam dunk. Creality really nailed it on that one. I’ve been printing with it pretty much nonstop since I got it at the end of April and it’s never failed me - it’s much more user friendly than all of the other creality machines I’ve used. That said, bambu is also awesome. My bambu (P1S) never fails prints and is also very, very user friendly - even more so than the creality - but comes at a much higher price point for a large build area. IMHO you really can’t go wrong with the creality - the price for size/convenience is really, really nice. And the open source FW is a plus - you can edit many things (I’ve done so)! But of course YMMV.

An HBA (host bus adapter) is a SAS controller (or rather, has a SAS controller chip on it). You mostly just want to make sure that your host (the server) has enough physical PCIe lanes to use the whole card, otherwise you’ll get bottlenecked there. You also want to check whether you’ve got 6G SAS or 12G SAS capability. If your drives only support 6 gig, for example, there’s zero point in buying a 12G SAS card, which is actually nice because 6G cards are a lot cheaper. You do want to make sure you actually need an HBA and not a RAID controller though - they’re easily confused. Not sure if I actually answered anything there but I write SAS firmware and use HBAs all the time, so feel free to ask me more and I’ll try to piece together a coherent answer.

That’s like… a month. Can it take an indefinite break instead?

Lmao, do it… would love to see what that entails

Figma balls

Except for Steve

My uni used Ubuntu in the CompE computer labs; unfortunately all other labs were windows. But the introduction to Linux was certainly nice!

As someone that works at a storage devices company - we do still manufacture 10K HDDs. They are faster than the 7200s of the same spec, by nature. All 2.5” drives for enterprise systems. And will actually continue selling them until ~2030. That said, they’re all but obsolete at this point, and aren’t really being developed on any more.

I think it’s the caller ID. Should be easy, just have to get my mom to set it first.

Interesting, I guess I’ll have to try again. It kept telling me that there was an error processing when I tried locking it.

Fun fact: you can’t lock your credit through Innovis if the name on your phone number isn’t the same as your real name (for instance, I’m on my mother’s phone plan - I still have my own number, but I guess it’s under her name). I ran into this issue literally four days ago :/

If Google had a baby she would drop it on its head spike it at the ground

Carefully-calculated trace lengths and signal pathing have left the chat